-
Newly upgraded ultra-fine compression laser: The laser adopts 4-fold lens group collimation and focus technology, the optical power is 5-5.5W. With high-performance fixed-focus laser, the laser focus area is reduced to 0.08*0.08mm. The high-density laser using a 50mm focal length, the effective laser energy range is longer and deeper, can easily cut 16mm thick wooden boards, 12mm black acrylic.
-
Wide Compatibility: Pergear LaserStorm S5 Laser Engreaving machine is compatible with operating software such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
-
Solid and easy installation structure design: The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, the whole process can be completed within 10-20 minutes.There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement.
-
Independent terminal support offline engraving: The 32-bit mothboard can support offline working, making it more convenient to use. The engraving can be done without connecting to a computer. 410x400mm large area engraving interval can meet your various engraving needs.
-
New laser with knob and Emergency stop button: It is more convenient and quick to adjust the height of the laser. It also has an emergency stop button, a limiter, a reset switch, and controls the engraving machine through physical buttons, further increasing the safety factor.
Higher Laser power & Faster engraving speed:
Laser power: 5W
Engraving speed: 11000/min
cutting depth: 15mm
Sintering temperature:800°C-850°C
Autofocus: Yes
Eye protection: Yes
Specification：
Brand: Pergear
Model: LaserStorm S5
Engraving area: 410*400mm
Laser output power: 5-5.5W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Connecting Interfaces: USB, Offline Use ,Wi-Fi
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Equipment net weight: 3.426kg
Package weight: 5.072kg
Equipment size: 570*600*270mm
Packing size: 620*345*130mm
Certification: CE FCC RoHS FDA
Carving materials: wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel;
Cutting material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather;
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10，MAc system.
Package content:
1 × mounting screw
1×tool kit
4×Foot pad foam
1×Film
3×Acrylic sheet
3 × wood chips
10×Wire tie
1×desiccant
1×brush
1×Clean cloth
1×card reader
1×TF card
1×power adapter
1×Instruction
1×data line
1×Touch screen components
1×HDMI cable
1×laser module
1×cutting pad
1×X axis assembly
1×Y axis left profile
1×Y axis right profile
1×Profile on the base
1×Under the base profile
3×foot bracket
Note:
●When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
